The most common call we get from a town like Crafton is a drain that has stopped moving. A kitchen sink that backs up, a bathroom drain that gurgles and sits, a main line that finally gives out after years of slow buildup. Those calls come in from homeowners dealing with original piping, from landlords managing older rental properties, and from property managers who need the problem handled without a lot of back and forth. We take all of them, and we handle the full scope of plumbing work from there: leaks, water heaters, fixtures, shutoff valves, sewer lines, and anything else that involves the water supply or drainage in a residential or commercial property.
We cover Crafton and the surrounding area, available every day from 7:30 AM to 10:30 PM.
Call (412) 991-9789 for a quote, and we will walk through what the job involves, what it costs, and when we can get out to you.
We answer when you call. We explain the work. We leave it dry.
When a problem will not keep, the first thing you need to know is whether the schedule has room for a short-notice call. When you call, we confirm what is available on the schedule and give you a clear picture of what comes next. There is no waiting until the following week to find out whether the job can be fit in.
For tenants and rental properties, we work around the situation on the ground. If a unit needs to stay occupied, we coordinate the visit around that. If a property manager needs to be on-site rather than the tenant, we confirm that on the call before anything is booked. The street layout around here is easy to work, and getting to a property in Crafton or the surrounding area is straightforward once the visit is on the schedule.
Emergency calls are handled the same way. A burst pipe, a sewer backup, a water heater that has stopped entirely: those are calls we take and respond to within our daily hours. Simple scheduling. A price settled on the call. Water back fast.
Crafton's housing stock runs older, and that means a significant share of the plumbing work here involves materials that are not manufactured anymore. Galvanized steel supply lines that have corroded from the inside out. Cast-iron drain stacks that have cracked or separated at the joints. Lead supply connections that were standard for their era and are now a liability. Each of these materials behaves differently when it fails, and each requires a different approach to repair or replacement.
Working on a house where the original piping is still in place means accounting for what is behind the wall before any work begins. We scope that on the call where we can, and we explain what we find before any work starts.
Older homes also carry fittings, valves, and connections that have not been sold in decades. When a fitting fails, the replacement is not always a direct swap. Adapters, transition fittings, and in some cases a short repipe of the affected run are what it takes to bring the repair in correctly. Drain and pipe work carried out to code keeps the job right for the long run, and that is what we aim for every time, regardless of what the original installation looked like.
The price depends on what the job actually involves, and that is not always clear until the pipe or fixture is accessed. A dripping faucet might be a cartridge replacement. It might be a corroded valve seat that requires a different repair entirely. A slow drain might clear with a standard snake. It might require hydro jetting to clear a grease or scale buildup that snaking alone will not reach. The fault itself, and what has to come apart to get to it, are what move the price.
When you call, we ask about the symptom, where in the property it is occurring, and whether any prior repair work has been done on that line or fixture. That lets us scope the job accurately and give you a rate on the phone before anything is scheduled. You know what is covered before the visit starts. If the work uncovers something beyond the original scope, we explain what we found and discuss the options before proceeding.
Call and the scope of the work is explained before anything is scheduled. Call and we'll handle the leaks, drains, and fixtures.
Some properties in and around Crafton sit on private water supplies or carry supply lines that run longer distances than a standard residential connection. Longer runs can develop pressure loss, mineral buildup, or corrosion at fittings that would not be an issue on a shorter line. We diagnose pressure problems at the source, whether that is a failing pressure-reducing valve, a corroded section of supply pipe, or a shutoff that is not fully opening.
Access is the main variable. A water heater in an open utility room is a different job than one in a crawl space with a low ceiling. A drain cleanout that is visible and accessible makes sewer line work faster and less disruptive than one that has been buried or built over. When you call, let us know about any access conditions that might affect the job, and we will account for them in the scope before the visit.
A faucet that drips after it is turned off is wasting water every hour it sits. The cause is usually a worn cartridge, a damaged seat, or a failed O-ring inside the valve body. A faucet that has seized and will not turn at all is often a corrosion problem, common in older fixtures that have not been operated in years. Both are repairable in most cases, and we carry out the diagnosis before recommending a replacement.
A shutoff valve that will not close all the way is a problem that only matters when it matters most, which is during a leak or a repair. Corroded gate valves and ball valves that have seized in the half-open position are common in older Crafton properties. We replace them with valves that operate correctly, and we confirm the shutoff is working before we leave. That includes the main water shutoff when it needs attention.
A drain that clears and then backs up again within a few weeks is telling you something about the condition of the pipe, not just the clog. Root intrusion, pipe sag, grease accumulation on a rough interior wall, or a partial collapse further down the line are all causes that a standard snake will not address. We look past the symptom and find the source, which may involve hydro jetting to clear the interior of the pipe or a camera inspection to see what is happening inside the line.
When a sewer line is causing repeated problems and the cause is not clear from above, a camera run through the line shows what is actually there. Root intrusion, cracks, offset joints, and sections of pipe that have collapsed or bellied are all visible on camera. That information determines whether the line needs clearing, repair of a specific section, or full replacement, and it avoids guessing. We discuss what the camera finds before recommending any next step.
When you call for a quote, the conversation goes faster if you can describe the symptom clearly. Where in the property is the problem occurring. Whether it is affecting one fixture or multiple. Whether water is actively running somewhere it should not be, or whether the issue is a slow drain, a pressure drop, or a fixture that is not working correctly. If the problem involves a water heater, knowing whether it is gas or electric helps us confirm what the repair or replacement will involve.
We will ask about access, about whether prior repair work has been done on that line or fixture, and about any conditions that might affect how the job is approached. By the end of the call, the scope is confirmed, the price is settled, and the visit is booked. One call, and the visit is booked. It is worth a look at the plumbing service list before you call.
We serve Crafton and the surrounding communities throughout Allegheny County. That includes Thornburg, Ingram, Rosslyn Farms, Green Tree, and Pennsbury Village. Whether the property is a single-family home, a rental unit, or a commercial building, the same scope of work applies and the same scheduling process is in place.
If you are in one of the neighboring communities and are not sure whether your address falls within our service range, call (412) 991-9789 and we will confirm it on the spot. We make the repair and leave it tidy.
It depends on whether a supply line and shutoff are already in place at the appliance location. If the appliance is going in a new spot or replacing one with a different connection type, a new line and shutoff may be needed. Call us and describe the appliance and the location, and we will confirm what the connection involves.
We look at the age of the fixture, the extent of the damage, and whether a repair is likely to hold or is just delaying a replacement. We explain both options and what each involves before any work begins. The decision is yours, and we give you the information you need to make it.
The plumbing work itself follows the same process, but a property with outbuildings, irrigation connections, or multiple supply points may have a more complex shutoff arrangement. Let us know when you call if the property has any non-standard supply or drain configurations, and we will account for that in the scope.
Slow flow at every fixture simultaneously points to a restriction on the main supply side rather than at any individual fixture. That could be a partially closed main shutoff, a failing pressure-reducing valve, or significant scale buildup in the main supply line. We diagnose the source before recommending a repair.
We explain what we found before we proceed with anything beyond the original scope. If accessing a fitting reveals that the surrounding pipe is in worse condition than the symptom suggested, we walk through what the additional work involves and what it would cost. You make the decision before any further work is done.
Yes. Older housing stock in this part of Allegheny County commonly carries galvanized steel supply lines, cast-iron drain pipes, and original shutoff valves that have not been operated in decades. Galvanized pipe corrodes from the inside out, which reduces water pressure and eventually causes leaks. Cast-iron drain lines crack and separate at joints over time. When we scope a job in an older property, we account for the pipe material and what condition it is likely to be in before the work begins.
We do. When you call, let us know the access situation and whether the tenant or a property manager needs to be present. We confirm the visit time with whoever is coordinating access, and we work around the occupancy of the unit so the repair is completed without unnecessary disruption to the tenant.
Call us at (412) 991-9789 and describe the additional job.
If the address is nearby and the schedule allows, we try to accommodate it. Each job is scoped and priced separately, and we confirm what is possible at the time of the call.
When you call (412) 991-9789, you reach someone who can scope the job on the phone, give you a rate before anything is scheduled, and confirm what is available on the calendar.
We will ask what you are seeing, where in the property it is occurring, and what access looks like. By the end of the call, you will know what the work involves, what it costs, and when we can be there. Dripping faucet fixed. Slow drain cleared. Water flowing right.
Call Mt.
Lebanon Plumbing Company at (412) 991-9789 to get started.
You can browse our full list of areas. Also serving close by: Green Tree, McKees Rocks, Stowe Township, Bridgeville, Glenshaw.
Every plumbing job in Crafton starts with a phone call and a straight answer about what the work involves. We cover the full range of residential and commercial plumbing, from a backed-up drain to a whole-home repipe, and we give you a price on the call before anything is scheduled. The table below lays out what each service covers, who it fits best, and what is worth knowing before you book.
| Type of Job | What the Job Covers | When to Call | Things to Keep in Mind |
|---|---|---|---|
| Water Heater Repair & Replacement |
| Households with no hot water, inconsistent water temperature, or an aging tank | We check the unit before recommending replacement. When a new unit is the right call, we install both tank and tankless models and confirm the price before scheduling. |
| Sewer & Main Line Service |
| Properties with slow drains throughout the house or recurring sewer backups | A sewer backup does not improve on its own. We run a camera or cable through the line to locate the problem before clearing or repairing. |
| Toilet Repair & Installation |
| Homeowners with a running, leaking, or non-flushing toilet | A running toilet can waste a significant amount of water before it is fixed. Most repairs are completed in a single visit. |
Call (412) 991-9789 and describe what you are dealing with. We will scope the job, give you a rate, and get the visit on the schedule.
(412) 991-9789